- Flowmeters & Measurement
- Pulse Units
- Datalogging
- Leakage Equipment
- Spares & Ancillaries
- Rental & Services
This sonde is a small battery power transmitter sealed in a robust torpedo shaped case which can be screwed onto the end of a drain rod. It is used to trace the route of larger diameter non-metallic pipes and can be used with all C-Scope locators (depth measurement with DXL4 and MXL4 locators).
This sonde is designed for use with the MXL4 locater/MXT4 transmitter, it has a small battery power transmitter sealed in a robust torpedo shaped case which can be screwed onto the end of a drain rod. It is used to trace the route of larger diameter non-metallic pipes over longer distances, depth measurement can also be detected.
This sonde is designed for use with the MXL4 locator/MXT4 transmitter and addresses the problems of detecting the position of blockages or other relevant features within a metal pipe. It is specifically designed with a low frequency signal output that is capable of transmitting through the walls of metal pipes, depth measurement can also be detected.
This sonde is a smaller diameter (24mm) battery powered transmitter which can be screwed on the end of a duct rod. It is used to trace to route or the position of blockages in ducting or other conduits that have more then one cable without snagging. This can be used with all C-Scope locators (depth measurement with DXL4 and MXL4 locators).
Can be used in pipes down to 10mm, resistant to kinking, available in 20m and 50m lengths, Water and gas proof with full length or tip only detection capability.
Just like the Plastic pipe tracer, the sonde is built into the end of the 5mm diameter 80 metre long fibreglass rod which is housed on a strong reel that rotates on its axle. The axle has a slip-ring which allows the generator to remain connected whist being inserted into the pipe. It can be used with all C-scope locators and when used with either the DXL4 and MXL4 locators, depth measurement can also be detected.
The Signal clamp allows the operator apply the generator/transmitter signal effectively to any cable. This is an extremely practical way to allow individual cables to be traced, even when amongst other cables.
This bag has specific compartments for your pipe and cable locator, generator/transmitter and accessory items when not in use. It also has space for other ancillaries items such as maps, marker paint and/or pegs etc.
This is a large holdall type bag which can carry the same items as the Professional carry bag but does not have the compartments to prevent the items moving around during transit.
For full product information on the C-Scope Accessories range please contact 01453 887449 or sales@mercomwp.co.uk